1995-1998 Acura TL Keyless Entry Remote Fob Programming Instructions

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 1995-1998 Acura TL Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.

FCC ID: Coming Soon
Factory Part No.: Coming Soon

Programming Notes:
Obtain all remote transmitters for this vehicle.
This procedure will erase all previously programmed remotes.
You must program all existing and new remotes that you wish to use on the vehicle at this time.

Step-by-Step How To Programming Instructions:
OPEN Driver’s door.

PRESS and HOLD the UNLOCK switch on the Driver’s door and continue to HOLD until instructed to release.

Within 10 seconds, INSERT the key into the ignition and REMOVE it five (5) times.

INSERT the key a sixth (6) time and leave it in the Ignition. The vehicle will respond by cycling the locks indicating entry into Programming Mode.

PRESS the LOCK OR UNLOCK Button on the remote. The vehicle will respond by cycling the locks indicating successful programming of the remote.

REPEAT Step 5 within 10 seconds for each additional remote to be programmed.

RELEASE the UNLOCK Button on the Driver’s door to exit Programming Mode.

Test all remotes.

Programming is now complete.