locksmith riverside key maker

1991-1993 Cadillac Deville Keyless Entry Remote Programming Instructions

Free Step-by-Step Programming Instructions for a 1991-1993 Cadillac Deville Keyless Entry Remote

Verify that this important information is on the the back of your remote before using these programming instructions.

FCC ID: ABO0104T, ABO0103T
Factory Part No: 25609144
Doc Cert No: DOC 218 K1035

Programming Notes:
Obtain all remote transmitters for this vehicle. 

This procedure will erase all previously programmed remotes.

You must program all existing and new remotes that you wish to use on the vehicle at this time.

Step-by-Step Programming Instructions:

Locate the Data Link Connector (DLC) underneath the driver’s side dashboard.

Please refer to the diagram above to determine the G and A cavity.

The letters will not appear on the connector.

they thare on the diagram for ease of reference.

Connect cavity G with cavity A using a fused jumper wire.

Your vehicle will respond by locking and unlocking the door locks within 2 seconds.

Press the UNLOCK button once on first remote to be programmed. 

Locks will lock and unlock verifying remote was programmed.

Press the UNLOCK button on second remote to be programmed (if applicable). 

Locks will lock and unlock to verify remote was programmed.

Disconnect jumper from data link connector (DLC). Test all remotes.

Programming is complete.